11 Replace the cover on the computer.

Lower the cover all the way down onto the case, leaving a 2-inch gap. Push the cover back until it snaps into place.

Set the top cover down so that there is about a two-inch gap between the back of the top cover and the back of the chassis.

Slide the top cover all the way back until it snaps into place.

You are now finished installing the card. You may turn on the computer and start using the new card.

WARNING Never turn on your computer unless all of its internal and external parts are in place. Operating the computer when it is open or missing parts can be dangerous, and can damage your computer.

Installing an Expansion Card

149

Page 160
Image 160
Apple 120 Series user manual Replace the cover on the computer