Apple G5 manual Working Inside Your Computer

13Slide the drive the rest of the way into the drive bay, aligning the optical drive guide pins in the slots, and gently push the drive into place.

14The optical drive release levers should close when the drive is installed correctly. If they don’t close, gently push them.

Push the optical drive into the computer so that the guide pins on the bottom of the drive engage the four slots inside the computer. Close the optical drive release levers completely when the drive is properly seated.

15Attach the optical drive ribbon cable to its connector on the logic board.

Reattach this cable to the connector on the main logic board.

16Replace the side panel, following the directions that begin on page 52.

Chapter 3 Working Inside Your Computer 61