Replacing the Optical Drive
Your Mac Pro comes with one or two SuperDrives installed in the optical drive bays. Follow these instructions to replace your optical drive.
Important: Contact your drive manufacturer or consult the manufacturerÕs website to determine if your drive is set to cable select mode. Before installation, set the drive to cable select mode if the manufacturer hasnÕt already done so.
To replace the optical drive:
1Open your Mac Pro and remove the side panel following the instructions on page 28.
2Lift the latch to unlock the optical drive carriers.
Important: When the latch is down, the drives and carriers are locked in the drive bays and canÕt be removed.
3Pull the optical drive carrier halfway out of the optical drive bay.
Slide the carrier partially out of the computer.
Make sure the latch is up.
42