!

CAUTION: The National Sanitation Foundation (NSF) requires that units over 36” (91 cm) in length

or weighing more than 80 lbs. (36 kg) to be either sealed or raised on the installation surface. If this

unit cannot be sealed at the point of use, 4” (10 cm) legs are included to allow for proper cleaning !

 

access below unit.

WARNING: Genuine APW Wyott Replacement Parts are specified to operate safely in the environments in which they are used. Some aftermarket or generic replacement parts do not have

!

the characteristics that will allow them to operate safely in APW Wyott equipment. It is essential to

!

use APW Wyott Replacement Parts when repairing APW Wyott equipment. Failure to use APW

Wyott Replacement Parts may subject operators of the equipment to hazardous electrical voltage, resulting in electrical shock or burn.

CAUTION: Locate the unit at the proper counter height, in an area that is convenient for use. The

! location should be level to prevent the unit or it’s contents from accidentally falling, and strong ! enough to support the weight of the unit and food.

!

WARNING: Failure to provide clearances will cause unit failure and invalidate warranty claims

!

(see installation instructions).

GENERAL INFORMATION

I.Consult the rating label for model and serial number. Write this information below before proceeding:

A. Model # __________________

B. Serial # __________________

II.Overall Dimensions w/Wire Feeder - 16.1" H (409mm) x 16.2" W (411 mm) x 26.5" 0 (674mm)

III.Product Opening - 3.0" H (76mm) x 10.50" W (267mm)

IV.

Productivity (per hour) - results will vary depending on line voltage and bread dryness.

V.Electrical Requirements

A.Single phase, 208-240 volts, 3330 watts, 15.9 amps.

B.Cordset configuration

1.Each toaster is equipped with a three-wire grounded cordset and standard three-prong plug.

2.In the United States, a four foot cordset with NEMA 6-20P plug.

3.In Canada, a six foot cordset with NEMA 6-20P plug.

Net/Shipping Weight - 54Ib.(24.5kg) /62Ib.(28.2kg)

INSTALLATION INSTRUCTIONS

I.Check Contents - refer to Figure 1, account for the following parts:

A.Toast Drawer - shipped in place

B.Reflector Tray - shipped in place

C.Wire Feeder - inside Reflector Tray

D.Instruction Manual - shipped loose

NOTE: DO NOT OPERATE THE TOASTER WITH THE REFLECTOR TRAY REMOVED FROM ITS POSITION

II.Position Wire Feeder - refer to Figure 2

A.Pull out Reflector Tray

B.Rotate Wire Feeder

C.Slide Reflector Tray back

D.WARNING: Operating the toaster without the Reflector Tray reduces toasting capabilities.

figure 2

4

Page 3 Page 5
Page 4
Image 4
APW Wyott FT1000H operating instructions General Information, Installation Instructions
Page 3 Page 5

FT1000H specifications

The APW Wyott FT1000H is an advanced food warmer designed to meet the demands of high-volume food service operations. This model stands out for its innovative features, cutting-edge technologies, and user-friendly characteristics, making it an optimal choice for both commercial kitchens and catering services.

One of the key features of the FT1000H is its high-capacity warming capabilities. It boasts a large, NSF-certified design with the ability to accommodate multiple food pans. This versatile unit can hold various food types, from entrees to sides, ensuring that meals are served at the ideal serving temperature. The adjustable thermostat allows operators to regulate the temperature from 120°F to 200°F, providing tailored heating options based on specific food requirements.

The FT1000H features a unique infrared heating element that delivers consistent and even heat distribution, minimizing the risk of hot or cold spots. This technology ensures that food remains warm and fresh for extended periods, enhancing the overall quality of the dining experience. Moreover, the unit is constructed with durable stainless steel, which not only contributes to its sleek, professional appearance but also ensures longevity and ease of cleaning.

In terms of usability, the APW Wyott FT1000H offers a user-friendly design with intuitive controls. The control knob is easily accessible, allowing staff to make quick adjustments on the fly. Additionally, the unit is equipped with a clear, easy-to-read temperature indicator, providing immediate feedback for monitoring purposes.

The FT1000H is designed with safety in mind, featuring non-skid feet that promote stability on countertops and prevent accidental spills. Furthermore, the unit is energy-efficient, designed to reduce electricity consumption without compromising performance. This aligns with the growing demand for sustainable kitchen appliances in the food service industry.

Portability is another advantage of the FT1000H, as it is lightweight and can easily be moved from one location to another. Whether for catering events or buffet setups, the unit adapts effortlessly to various environments.

In conclusion, the APW Wyott FT1000H is a state-of-the-art food warmer that excels in functionality, durability, and performance. Its advanced heating technologies, user-friendly features, and safety considerations make it an invaluable asset for any food service operation seeking efficiency and reliability in food warming solutions.
Top Page Image Contents