￿Relight following steps 4 through 6 under Standing Pilot Lighting Instructions.

LIGHTING MAIN BURNER:

Since the burner is lit from constantly burning pilot, turn knobs to "HI" to put the unit in operation; then adjust to any desired position between "LO" and "HI".

￿

￿

￿

￿

￿

￿

To light burner, turn knob to "max." then back off to the desired flame level. The range of adjustment is virtually infinite between high and off. (At the small flame, there is a pre-set low).

When the broiler is first heated, it will smoke until oil used in manufacturing, preservation and dust from storage and shipping are burned off. An hour at "max." on all burners is usually sufficient.

Turn knobs off and let cool

.

For first cooking, set the grates at maximum tilt position and preheat before broiling. You will have to experiment with knob settings and grate position for each particular item.

Keep the grease/water pan with sufficient water to cover the entire bottom.

Clean regularly. Grates may be removed for washing in the sink. Brush out carbonized particles.

Thoroughly wash the grease/water pan.

.

CAUTION

Never attempt to move a grill section while cooking. An unexpected flare could cause severe injury. Turn off the unit, let it cool and use potholders and/or gloves to reposition or remove. The space between the legs at the bottom admits combustion air. DO NOT BLOCK THIS SPACE.

Main burner air supply:

For efficient burner operation, a proper balance of gas volume and primary air supply must be maintained which will result in complete combustion. Insufficient air supply results in a yellow streaming flame. Primary air supply is controlled by an air shutter on the front of the burner.

Loosen the screws on the front of the burner, and adjust the air shutter to just eliminate the yellow tips of the burner flame. Lock the air shutter in place by tightening the screws.

European Community:

If adjustment becomes necessary in the field, it should be done by a factory authorized and trained technician who should seal the screw after the adjustment to safeguard against un-authorized tampering by the end user.

All burners are lit from constantly burning pilots. Turning the valve to the desired flame height is all that is required to put the unit in service.

Do not permit fans to blow directly at the unit. Wherever possible, avoid open windows next to the units' sides or back. Avoid wall type fans which create air cross-currents within a room.

It is also necessary that sufficient air should be allowed to enter the room to compensate for the amount of air removed by any ventilating system. Otherwise, a subnormal atmospheric pressure will occur, affecting operation and causing undesirable working conditions.

A properly designed and installed hood will act as the heart of the ventilating system for the room or area in which the unit is installed, and will leave the unit independent of changing draft conditions.

All valves must be checked and lubricated periodically. This must be done by an authorized service representative in your area.

OPERATING INSTRUCTIONS

OPERATION: Turn the burners on about 15-20 minutes before cooking for preheating. Set the knobs to the desired flame height or temperature. Each valve will control the gas flow to the burner to bring that area of the unit up to the set temperature. If different temperature settings are to be used, adjoining areas should be set at progressively higher temperatures using the lowest temperatures on the outside burners. A uniform

8

Page 7 Page 9
Page 8
Image 8
APW Wyott GCRB-48H, GCRB-36H, GCB-18H, GCB-48H, GCB-36H, GCRB-24H, GCB-24H warranty Operating Instructions, Lighting Main Burner
Page 7 Page 9

GCRB-18H, GCB-24H, GCRB-24H, GCB-36H, GCB-48H specifications

APW Wyott is renowned for producing high-quality cooking equipment that serves the needs of the food service industry. Among their impressive lineup, the GCRB-36H, GCB-18H, GCRB-24H, GCB-36H, and GCB-24H stand out due to their design and operational efficiency, catering to restaurants, catering operations, and various foodservice establishments.

The GCRB-36H is a grill that features heavy-duty construction with a stainless steel body, ensuring durability and easy maintenance. Its 36-inch cooking surface can accommodate a variety of foods, making it ideal for grilling meats, vegetables, and more. With adjustable heat controls, operators can achieve the perfect cooking temperature for different dishes. A standout feature of this model is its radiant heat technology, which ensures even cooking and enhances flavor retention.

Similarly, the GCB-18H offers a more compact solution with a width of 18 inches, making it perfect for kitchens with limited space. Despite its size, it does not compromise productivity. This model also incorporates easy-to-use heat controls and a stainless steel construction, known for its longevity and resistance to corrosion.

The GCRB-24H is another versatile option with a 24-inch cooking surface, designed to fit into tight spaces while providing the same radiant heat technology that ensures even cooking. This model is particularly useful for high-demand foodservice environments, promoting operational efficiency.

For establishments needing a robust solution, the GCB-36H presents a large 36-inch cooking area, making it ideal for handling larger volumes of food. It includes features such as a removable grease tray, which facilitates easy cleanup and enhances the overall cooking experience by preventing flare-ups.

Finally, the GCB-24H embodies a balance between size and efficiency with a 24-inch cooking surface. It is engineered with user-friendly controls and a robust design, making it suitable for both high-volume cooking and occasional use. This model is particularly favored for its energy efficiency, which can lead to reduced operational costs for businesses.

In conclusion, APW Wyott's offerings of the GCRB-36H, GCB-18H, GCRB-24H, GCB-36H, and GCB-24H captivate users with their robust construction, versatile heating technology, and user-oriented designs. These devices are engineered to meet the demands of modern foodservice establishments while providing remarkable performance and reliability in diverse cooking applications. Restaurants and catering services looking for durable and efficient cooking solutions can greatly benefit from this range of products, ensuring quality food preparation that meets customer expectations.
Top Page Image Contents