APW Wyott PC-1A Safety Precautions, Table Of Contents, Immediately Inspect For Shipping Damage

Models: PC-1A MPC-1A

1 12
Download 12 pages 18.96 Kb
Page 3
Image 3
SAFETY PRECAUTIONS

SAFETY PRECAUTIONS

Before installing and operating this equipment be sure everyone involved in its operation are fully trained and are aware of all precautions. Accidents and problems can result by a failure to follow fundamental rules and precautions.

The following words and symbols, found in this manual, alert you to hazards to the operator, service personnel or the equipment. The words are defined as follows:

!

DANGER: This symbol warns of imminent hazard which will result in serious injury or death.

!

 

 

 

!

WARNING: This symbol refers to a potential hazard or unsafe practice, which could result in

!

serious injury or death.

 

 

 

 

CAUTION: This symbol refers to a potential hazard or unsafe practice, which may result in minor or

!

! moderate injury or product or property damage.

 

 

 

!

NOTICE: This symbol refers to information that needs special attention or must be fully understood

!

even though not dangerous.

IMMEDIATELY INSPECT FOR SHIPPING DAMAGE

All containers should be examined for damage before and during unloading. The freight carrier has assumed responsibility for its safe transit and delivery. If equipment is received damaged, either apparent or concealed, a claim must be made with the delivering carrier.

A)Apparent damage or loss must be noted on the freight bill at the time of delivery. It must then be signed by the carrier representative (Driver). If this is not done, the carrier may refuse the claim. The carrier can supply the necessary forms.

B)Concealed damage or loss if not apparent until after equipment is uncrated, a request for inspection must be made to the carrier within 15 days. The carrier should arrange an inspection. Be certain to hold all contents and packaging material.

Installation and start-up should be performed by a qualified installer who thoroughly read, understands and follows these instructions.

Location Of Data Plate:

The data plate is located on the back side of the front panel.

 

TABLE OF CONTENTS

Important Safety Instructions

2

Safety Precautions

3

Specifications & Dimensions

4

Installation

4

Operating Instructions

5

Cleaning/Maintenance

5

Service/Repair

6

Troubleshooting Guide

6

Wiring Diagrams

7

Parts Lists

8

MPC-1A

8

PC-1A

10

Warranty

12

3

Page 3
Image 3
APW Wyott PC-1A Safety Precautions, Table Of Contents, Immediately Inspect For Shipping Damage, Location Of Data Plate