SPECIFICATIONS AND DIMENSIONS
!Non jamming agitator motor gently turns to distribute kernels evenly over heated surface.
!Motor and controls located away from kettle heat in vented part of top cabinet.
!Produces a kettle of popcorn every 2 1/2 minutes.
!Popcorn kept hot by using heating element on the bottom and bulb heat on the top.
!Interiors are stainless steel.
!Cabinet constructed of stainless steel and tempered glass.
!Kettle made of
!Kettle is secured to cabinet through
MODEL
SIZE
6 - 8 oz
6 - 8 oz
8
8
VOLTS
120
240
120
240
WATTS
1125
1125
1643
1643
AMPS
9.4
4.7
13.7
6.8
DIMENSIONS
25 1/2"H x 19"W x 15 5/8" D
25 1/2"H x 19"W x 15 5/8" D 30"H x 22 1/4"W x 21 1/4" D 30"H x 22 1/4"W x 21 1/4" D
SHIP WT.
63#
63#
75#
75#
INSTALLATION
1.Always clean equipment thoroughly before first use. (See general cleaning instructions.)
2.Check rating label for your model designation and electrical rating.
3.Locate equipment on level counter and plug into a grounded outlet so the plug is accessible. (See individual description for electrical loads.) On units bearing the CE marking, the appliance must be connected by an earthing cable to all other units in the complete installation and, hence, to an independent earth connection.
4.Install heat lamp in lamp holder at top rear of cabinet.
5.Slide drawer into slot at base of cabinet.
6.Install kettle by inserting locking hinge pin through holes in support bracket and kettle.
7.Insert kettle plug into ceiling mounted receptacle. Twist plug to lock.
8.Install kettle hinged covers by inserting tabs into support bracket slots. Cover with lifting knob must be installed on operator side of kettle.
9.Install acrylic doors.
|
|
Lifting Arm
Latching Bracket
Stirrer Assy
Support Bracket
Twistlock
Plug
Cover
Kettle
Locking Hinge Pin
Latching Handle
Twistlock Plug
Locking Hinge Pin
Lifting Knob
Support Bracket
Kettle
Hinged Cover
Latching Handle
4