Page 2 of 5
GETTING FAMILIAR WITH CONTROLS
DIGITAL CONTROLLER – PANEL LAYOUT
Control Buttons (AS INDICATED BY CIRCLED LETTERS)
A. Down Arrow – Pressing this key decreases the temperature setting. Setting the temperature below 60°F turns the heat pump off.
B.Pool / Spa Selector – Pressing this key selects either the pool or spa mode. Also used to accept programming selections.
C.Up Arrow – Pressing this key increases the temperature setting. The maximum temperature setting is 104°F.
Indicator Lights & Displays (AS INDICATED BY CIRCLED NUMBERS )
1)Spa Indicator Light – If lit, indicates spa thermostat is controlling heater.
2)Heating Indicator Light – If lit, indicates heat pump is heating.
3)Pool Indicator Light – If lit, indicates pool thermostat is controlling heater.
4)LED Display – Displays water temperature when UP/DOWN ARROWS are not being pressed, or desired temperature when UP ARROW or DOWN ARROW is pressed. Water Temp Display – Example …104º F displayed.
5)Desired Temp Light – Indicates temperature setting is displayed, and temperature setting is changing due to the UP ARROW or DOWN ARROW being pressed.
8
