AV9
E-10
English
AV9
E-11
Con guring the AV9
The AV9 ‘Setup Menu’ has six ‘Basic’ and six ‘Advanced’ menu screens which take you through the
con guration process. The ‘Basic’ menus enable you to match your AV9 to your speakers. The ‘Advanced’
menus allow you to optimise the operation of your system. Screen shots of these menus are shown in
shaded boxes on the following pages.
The best way to set the AV9 up is using the on-screen display (OSD). To view the OSD for the
initial set up, use the composite video output to connect to your TV. This is because the
high quality video output has several display modes and may be incompatible with your display
device in the default con guration. The OSD will not be visible at all if you try to use an HDMI
connection.
The AV9 defaults to the NTSC video standard – most display devices can synchronise to this
automatically. For PAL-only display devices, press and hold the OK button for two seconds, when the
AV9 will change to the PAL video standard. As soon as a video signal is input to the AV9, it detects
automatically which standard it is and switches to it.

Entering setup mode

To enter the Setup menus press and hold the MENU button on the remote control, or on the front panel,
for at least two seconds. The ‘Setup Menu Index’ is displayed on your display device.
UNSTABLE OSD MENU DISPLAY?
Your AV9 may be in the wrong video standard mode. Press and hold the OK button for more than two
seconds to switch between the NTSC and PAL standard OSD mode.

Setup lock

To prevent tampering with the AV9 setup con guration you can ‘lock’ the menus by pressing the OK, TUNER
and DVD-A buttons simultaneously on the front panel. To unlock the AV9, press the same buttons again.

Setup Menu

The main ‘Setup Menu’ page allows you instant access to six ‘Basic’ and six ‘Advanced’
menus.
They are listed side-by-side on the OSD on your display device. The selected line of the
menu is also displayed on the front panel of the AV9. Use the E remote control button
to go to page 1 from the menu heading, or use the navigation buttons to scroll down the
list to a speci c page, then press OK to go directly to the page.
Save Setup takes you to the ‘Save Settings’ screen to allow you to save in one of the
 ve available presets.
Exit Setup exits the Setup menus without saving any changes.
Each of the following sections shows the screen that is displayed as you move through
the menus.

Navigating the setup menu

... BY USING THE REMOTE CONTROL
The Set-up menu can be navigated by using the cursor (arrow) keys on the remote control. This is by far
the easiest method.
1. To enter the Set-up menu, press and hold the MENU button (which is located immediately under
the navigation buttons) for at least two seconds, until the Index page appears. (Pressing the
menu button for just a short time will take you to ‘Main Menu Screen 1’. If this happens, the
Main Menu can be closed by pressing MENU for a second time.)
2. When the menu heading is highlighted, using the D and E keys will navigate between menu
pages. Using this method to navigate between pages the  rst time the unit is being con gured
will help to ensure that no pages are missed out.
3. Use the B and C keys to navigate up and down the menu lines.
4. To change the setting for a particular menu item, highlight the item then use the D and E keys
to cycle through the options for that item.
5. Once you have set all the menu items on a page to have values that are appropriate for your
system, move the menu highlight to the top of the screen (the menu heading) and press E to
move to the next menu page.
6. At any time, press the MENU button to return to the main Set-up menu index screen.
7. To save the changes you have made, return to the Set-up menu index page and highlight the
‘Save Set-up’ item at the bottom of the screen. Press the OK button to save the settings. Press
OK again to exit the Set-up menu.
In addition to the above method of moving from page to page using the D and E keys, each menu
page can be accessed directly from the Set-up menu index page. This is achieved by using the cursor
keys to move the menu highlight to the desired page on the Index page, then pressing OK.
... BY USING THE BUTTONS ON THE FRONT PANEL OF THE AV9
The AV9 front panel controls can be used to con gure the options. Follow the instructions given for using
the remote control, in this case using the EFFECT/6 button for ‘down’, the MODE/5
button for ‘up’ and
the volume control for left and right.
MENU
OK
Setup Menu Index
Basic Advanced
1. General 1. Speaker Eq
2. Speaker Size 2. Video
3. Delays 3. Digital
4. Level Set 4. Zone 2
5. Subwoofer 5. Input Trim
6. THX 6. Input name
Save Setup Exit Setup