Technical specifications
AMPLIFIER SPECIFICATION
Output power
8Ω | , five channels | 70W |
8Ω | , two channels | 90W |
8Ω | , single channel | 100W |
Harmonic distortion, 1W, 8Ω at 1kHz 0.02% typical | ||
Left/right crosstalk | 60dB at 1kHz | |
Frequency response ±1.0dB | 20Hz to 20kHz | |
Inputs |
| |
Line inputs |
| |
| sensitivity | 200mV |
| input impedance | >10kΩ |
| overload margin | >20dB |
Power amplifier input sensitivity | 740mV (normal gain) | |
Outputs |
| |
Preamplifier |
| |
| nominal output level | 200mV |
| maximum output level | 3V |
Headphones |
| |
| output impedance | 390Ω |
Physical |
| |
Dimensions W x D x H | 430 x 450 x 150mm | |
Weight net | 11.9kg | |
Weight packed | 14.1kg | |
Mains voltage | 230V ±12% | |
|
| 120V ±12% |
Power consumption (maximum) | 500VA | |
Accessories supplied | Mains lead | |
|
| |
|
| 2 x AAA batteries |
|
| AM loop aerial |
|
| FM ribbon aerial |
RADIO SPECIFICATION
FM section
30 preset stations available
RDS Station Identification, Radio Data Display
FM tuning range | 87.5 to 108MHz |
FM sensitivity | < 6µV |
THD |
|
mono | < 0.25% |
stereo | < 0.35% |
Signal/noise ratio |
|
mono | > 72dB |
stereo | > 66dB |
Pilot tone suppression | > 60dB |
Alternate channel selectivity IHF | > 60dB |
Capture ratio | < 3dB |
AM section |
|
10 preset stations available |
|
AM tuning range |
|
10kHz step | 530 to 1710kHz |
9kHz step | 531 to 1602kHz |
Usable sensitivity | < 30µV |
IF rejection | > 36dB |
Signal/noise ratio, 5mV input | > 38dB |
THD, 5mV input | < 3% |
E&OE
NOTE: All specification values are typical unless otherwise stated.
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.
AVR200
18