PVR PVR Device Mode, VCR VCR Device Mode, E-34

PVR PVR Device Mode

The V Device Mode button configures the CR102 to control the functions of a video recorder or similar device. You will need to configure this Device Mode to work with your equipment. Pressing this button also selects PVR as the AVR500/AVR600/AV888 source.

PToggles power between standby and on.

0…9	Functions as original remote number key.
	Selects Tape input on AVR500/AVR600/
PHONO	AV888.

ESHiFT + Eselects PHONO input on the AVR600/AV888.

TV/AV

Toggles between available inputs (e.g. AV1,

RAV2)

SModifies many keys (see individual key descriptions, below)

	Selects multichannel (MCH) input on
AUX	AVR500/AVR600/AV888.

HSHiFT + Hselects AUX input on the AVR500/AVR600/AV888.

	Selects iPoD input on AVR500/AVR600/
NET	AV888.

ESHiFT + E selects network (Net) internal input on the AVR500/AVR600/AV888.

Navigate setup and programme selection menus.

OK is equivalent to ‘Enter’ or ‘Select’ on some remotes.

MOperates the Exit function if the PVR uses this feature

UTurns on the Menu function if the PVR uses this feature

DToggles display between TV and PVR

@Toggles the mute function. By default this key operates the AMP Mute

]	Channel down
[	Channel up

-+ Decrease (–) and increase (+) AVR500/ AVR600/AV888 volume

) Fast rewind

$ Play

&Toggles pause of playback

( Fast forward

!Operates the Favourites function if the PVR uses this feature.

#Stop playback

%Starts recording

H(not used)

UDuplicates function of ReD key (if used)

(RED)

TDuplicates function of Green key (if used)

(Green)

ODuplicates function of Yellow key (if used)

(Yellow)

BDuplicates function of Blue key (if used).

(Blue)

VCR VCR Device Mode

The W Device Mode button configures the CR102 to control the functions of a video recorder or similar device. You will need to configure this Device Mode to work with your equipment. Pressing this button also selects VCR as the AVR500/AVR600/AV888 source.