HDMI
AV | SAT | DVD | VCR | PVR | OUT 2 | OUT 1 |
HDMI connectors
AV, SAT, DVD, VCR, PVR
Connect the HDMI video outputs of your source equipment to these corresponding HDMI inputs.
OUT 1
Connect this output to the HDMI video input of your main zone display device.
OUT 2
Connect this output to the HDMI video input of your second display device or to another HDMI display device in a second living space. As the unit has only one processed video path, this signal will be a copy of the signal on Out 1.
VCR
PVR
AV | SAT |
DVD
Zone 2 connectors
Z2 AUDIO OUT, Z2 VIDEO OUT
Connect these analogue audio and video outputs to your Zone 2 equipment. See ‘Multi- room Setup’ on page 50 for information.
VCR, PVR
Connect these inputs to the
English
NOTE
All Zone 1 analogue video outputs will be disabled if an HDMI digital video source is selected.
Component/RGB video connectors
These inputs are suitable for connection to source devices which output Component (YUV or YPbPr) or RGB high quality analogue video signals. These signals are usually available from DVD players,
If you are connecting up to an RGB source you will also need to connect the source’s Composite output to the unit’s Composite input to act as a video sync. The Composite signal should be on the same named input as the RGB signals.
RGB video outputs on source equipment are often on SCART connectors. You will need to use a SCART to ‘RGB+Sync on phono’ breakout cable, available from your Arcam dealer.
NOTE
When setting up the menus (later in this manual), you will need to select whether the
AV, SAT, DVD
Connect the Component video outputs of your source equipment to these inputs.
OUT
Connect this output to the Component video input of your display device.
NOTE
Analogue RGB video output is not available from the AVR500. The analogue