Arcam AVR600, AVR500 Digital audio connectors, Analogue audio inputs, Front panel AUX input, E-16

SUBWOOFER OUTPUT

Digital audio connectors

Analogue audio inputs

MCH input

Front panel AUX input

TAPE, CD, AV, DVD, SAT, VCR, PVR

Connect these inputs to the digital outputs of your available source equipment.

TAPE, CD, AV, DVD, SAT, VCR,

PVR

Connect the left and right inputs to the left and right outputs of your source equipment.

This multichannel analogue audio input can be connected to a source device which outputs surround sound on its analogue outputs. Such devices typically include DVD-Audio and SACD players. This input does not pass through any of the audio processing in the unit, therefore functions such

AUX PHONES

The front panel AUX input can be used as an analogue or optical digital input.

For analogue sources, use a stereo 3.5mm lead; for digital sources use a 3.5mm optical lead. The front input is also used for the auto-setup microphone input.

as speaker size and distance from the listening position should be copied from the Setup menus into the Setup

menus of your multichannel source. Note however that speaker level trims are applied to the MCH input on the unit. Therefore speaker level trim settings on multichannel source equipment should be left unset at zero.

Subwoofer outputs

Connect each of these outputs to the LFE input(s) on your subwoofer(s).The Subwoofer outputs are buffered, have a low output impedance, are at line level and follow the Zone 1 volume control setting. They are able to drive long cables or several inputs in parallel if required.

For more information on connecting speakers, see page 18 and 49.

Front panel PHONES socket

This socket accepts headphones with an impedance rating between 32Ω and 600Ω, fitted with a 3.5mm stereo jack plug. The headphone socket is always active, except when AVR500 is muted.

When the headphone jack is inserted, the speaker outputs and analogue pre-amplifier outputs are automatically muted.

E-16