Arcam P75 manual Using this handbook, Models covered, Contents, A65 A75, Safety guidelines

Using this handbook

This handbook has been designed to give you all the information you need to install, connect, set up and use the Arcam A65, A75 and P75 amplifiers. The remote control handset supplied with the equipment is also described.

It may be that your amplifier has been set up as part of your system installation by a qualified Arcam dealer. In this case, you may wish to skip the sections of this handbook dealing with installation and setting up the unit. Use the Contents list on this page to guide you to the relevant sections.

Models covered

This handbook covers two integrated amplifiers:

A65

A75

and one power amplifier:

P75

These amplifiers have many features in common.

Both the A65 and A75 have remote controlled input selection and a motorised volume control which can be operated by the CR-389 remote control handset supplied.

Safety

Safety guidelines are set out on the inside front cover of this handbook.

Many of these items are common sense precautions, but for your own safety, and to ensure that you do not damage the unit, we strongly recommend that you read them.

Contents

Safety guidelines	2
Safety instructions	2
Safety compliance	2
Using this handbook	3
Models covered	3
Safety	3
Installation: A65 and A75	4
Positioning the unit	4
Connecting to loudspeakers	4
Connecting to a power supply	4
Connecting to other equipment	5
Using the amplifiers	6
Recording onto tape	6
Using a remote control	6
Using the remote control	7
CR-389 remote control	7
Installation: P75	8
Loudspeaker connection	8
Connecting to other equipment	8
Connecting to a power supply	8
Using the power amplifier	8
Bi-wiring and bi-amping loudspeakers	9
Before you start	9
Bi-wiring your loudspeakers	9
Bi-amping your system	9
Technical specifications	10
Guarantee	11
On-line registration	11

A65/A75/P75

3