Arcam A65, P75, A75 manual Technical specifications

Technical specifications

	A65	A75	P75
Output power (20Hz–20kHz)
8Ω, continuous	40W	50W	50W
8Ω, 1 channel, 1KHz	50W	60W	60W
4Ω, 1 channel, 1KHz	80W	90W	90W
Harmonic Distortion
Rated output into 8Ω at 1kHz	0.01%	0.01%	0.005%
Peak current rating	±15A	±15A	±15A
L/R Crosstalk	–68dB	–68dB	–90dB
Input sensitivity for rated power output	250mV	260mV	540mV
Frequency response ± 0.25dB	20Hz–20kHz	20Hz–20kHz	20Hz–20kHz
Inputs
Line inputs:
Noise (CCIR) ref. rated power	–100dB	–100dB	–110dB
Input impedance	12kΩ	12kΩ	100kΩ
AV/DVD (Processor Mode):
Input impedance	N/A	12kΩ	N/A
Input sensitivity	N/A	540mV	N/A
Power Amplifier:
Input impedance	N/A	N/A	100kΩ
Phono input:
Noise (CCIR) ref. rated power	–75dB	–76dB	N/A
Input sensitivity	1.9mV	2.0mV	N/A
Input impedance	47kΩ	47kΩ	N/A
Overload margin	30dB	30dB	N/A
Outputs
Pre-amplifier output:
Nominal output level	510mV	540mV	N/A
Maximum output level	8V	8V	N/A
Output impedance	<3Ω	<3Ω	N/A
Tape output:
Output impedance	<3Ω	<3Ω	N/A
Headphones:
Maximum output level into 600Ω	40mW	40mW	40mW
Output impedance	80Ω	80Ω	80Ω
Mains voltage	230V ± 10%	230V ± 10%	230V ± 10%
	115V ± 10%	115V ± 10%	115V ± 10%
Power consumption (max)	370VA	400VA	400VA
Physical
Dimensions W x D x H	430 x 330 x 85mm	430 x 330 x 85mm	430 x 330 x 85mm
Weight net	5.4kg	5.6kg	5.6kg
Weight packed	6.9kg	7.1kg	7.1kg
Supplied accessories	Mains lead	Mains lead	Mains lead
	CR-389 remote	CR-389 remote
	2 x AAA batteries	2 x AAA batteries
E&OE

Continual improvement policy

Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.

NOTE: All specification values are typical unless otherwise stated.

A65/A75/P75

10