Flash will not fire
Flash set to OFF
LED is blinking. Flash light is fully charged when the Operation LED turns off.
Battery level is low - When the battery indicator does not show a fully charged battery, the
voltage is too low for the flash to work. Please change batteries.
Image is blurred / out of focus
Subject is out of focal range. Ensure that there is at least 1.5m ( 5ft ) between the camera lens and subject. Camera moved during the shot- Hold the camera steady while taking the picture. When flash is on, hold the camera steady until flash has fired twice( The first flash is to reduce
red-eye and to detect the brightness of the target.)
Computer does not recognize camera for Windows 98SE, The camera driver has to be installed before picture download. In picture preview mode, ensure that USB mode is set to MSDC before connecting the camera to the computer. For Windows 2000/ ME /XP, the camera is recognized as a plug
disconnect your digital camera from your computer after use.
20
