Taking Pictures
Resolution
The camera is defaulted to High Resolution (CIF) mode 
.
To select low resolution (QCIF):
1.Press Mode button repeatedly until 
is shown on the LCD panel.
2.Press Shutter button to confirm your selection and "80" will appear on the LCD panel, indicating that a maximum of 80 photos can be taken with low resolution.
NOTE: After taking a few photos of low resolution, if you want to switch back to high resolution: (1)
Press Mode button until 
appears on the LCD panel (2) Press Shutter button to confirm your selection and the remaining number of photos that can be taken will be shown on the LCD panel.
Selecting AC frequency
This camera is set to your country's AC mains frequency (e.g. 60Hz for US, 50Hz for Europe). If you take photos under an electric light source in another country with a different frequency, you have to set the frequency to match the AC mains frequency of the country you are in. Otherwise horizontal, black stripes will be found on the taken photos due to incorrect mains frequency. There will be no problems when taking photos under sunlight.
To change the frequency:
1.Press Mode button repeatedly until "60 (Hz)" or "50 (Hz)" is shown on the LCD panel.
2.Press Shutter button to change from "60 (Hz)" to "50 (Hz)" (or from "50 (Hz)" to "60 (Hz)" to match that country's AC mains frequency.
For example, if the preset for your camera is 60 (Hz), you will see 50 (Hz) on the LCD panel when you press Mode button repeatedly. To change to 50 (Hz), press Shutter button once.
Taking a photo
You may choose to hold camera as shown in Figure 1 or Figure 2 when taking photos.
Figure 1 | Figure 2 |
1.Look through the viewfinder.
NOTE: The focus is set to work best when taking photos of an object that is at least 2 feet away from the camera.
2.Press Shutter button.
You will hear a "beep" and the frame counter will count down 1 frame, indicating that an image has been taken.
5
