Digital Camera User Guide

Note: Default setting of the camera is on High Resolution Mode.

Look through the viewfinder. The focus is set to work best when taking a photo of a subject that is minimum 2 feet away from the camera.

Press the Shutter button, you’ll hear a beep sound and the frame counter will count down 1 frame which indicates an image has been taken.

TIP: It is recommended that you take a few test shots at different distances so that you can understand how the photos are actually captured by the camera.

Changing the Capture Mode

Select the Low Resolution Mode

Press Mode button to select

Press Shutter button to change it then the frame counter will change to 107.

Select the Continuous Mode

Press Mode button until is shown.

Hold down the Shutter button for taking photos continuously until the frame counter countdown to 00.

Note: The time for the AVI video is 15 seconds for Low Resolution Mode and 3 seconds for High Resolution Mode, in a Frame/Rate at 7 fps.

Select the Self-timer Mode

To take photos with the self-timer, press Mode button until

or for Low Resolution.

Press the Shutter button to start count down.

Beep sound is heard until the photo is taken after 10 seconds.

for High Resolution

Clear all the photos

Press Mode button until or shown.

Press Shutter button then the rubbish bin icon will start to flash.

Press Shutter button again and you’ll hear a double beep sound, note that all the High and Low resolution photos will be cleared at once.

Remark: It will return to frame counter if the mode is not selected within 5 seconds.

Auto Off

It will Auto Off after 30 seconds without pressing any button. Press the ‘Mode’ button to power on it.

Low Battery

If at anytime the battery icon becomes " " , it indicates low battery. Upload your photos to the computer as fast as possible. You are recommended to change new batteries immediately.

6

Page 8
Image 8
Argus Camera DC 1600 manual Changing the Capture Mode, Auto Off, Low Battery