TROUBLESHOOTING

PROBLEM

PROBABLE CAUSE

CORRECTION

 

 

 

 

 

Engine will

1.

Fuel tank empty or low.

1.

Check fuel level. Fill tank if

not start

2.

Spark plug wire loose or off.

 

necessary.

 

3. Engine/Blade control cable

2.

Check connection.

 

 

detached, broken, or not

3.

Check cable. Adjust, repair

 

 

adjusted properly.

 

or replace as necessary.

 

 

 

 

 

Engine is

1.

Mower clogged with grass.

1.

Clear clippings from under

difficult to

 

 

 

mower. (Allow the mower to

restart

 

 

 

clear clippings before

 

 

 

shutting off engine.)

 

 

 

 

 

 

 

 

 

Cut is poor

1.

Worn blade.

1.

Check blade (See

 

2. Too much grass is being

 

Maintenance).

 

 

removed per cutting.

2.

Raise cutting height.

 

3.

Grass is too wet.

3.

Allow grass to dry.

 

4.

Mowing speed is too fast.

4.

Mow slower.

 

 

 

 

Grass does

1. Too much grass is being

1.

Raise cutting height.

not disperse

 

removed per cutting.

2.

Allow grass to dry.

evenly

2.

Grass is too wet.

3.

Mow slower.

 

3.

Mowing speed is too fast.

 

 

 

 

 

 

 

Mower does

1.

Grass bag is overfilled.

1.

Empty grass bag and do not

not bag

2.

Mulching plug is installed.

 

allow it to overfill.

clippings

 

 

2.

Remove mulching plug.

 

 

 

 

Wheel drive

1. Wheel drive control not

1.

Engage wheel drive control.

does not

 

engaged.

2.

Check drive belt. Adjust as

engage (Self-

2.

Drive belt out of position.

 

necessary (See Service and

Propelled

3.

Drive belt worn or damaged.

 

Adjustments).

3.

Replace belt (See Service

models).

4. Rear wheels in different cutting

 

and Adjustments).

 

 

heights.

 

 

5.

Idler spring detached.

4.

Adjust rear wheels to same

 

6. Wheel drive control cable

 

cutting height (See

 

 

Operation).

 

 

detached or broken.

 

 

 

5.

Attach idler spring to notch

 

7. Friction disc not adjusted

 

 

on idler arm. Contact your

 

 

properly or damaged.

 

 

 

 

Dealer.

 

8.

Bearings damaged.

 

 

6.

Check wheel drive control

 

9.

Debris in gear set.

 

 

cable. Adjust or replace as

 

 

 

 

needed. See Service and

 

 

 

 

Adjustments.

 

 

 

7.

Contact your Dealer.

 

 

 

8.

Contact your Dealer.

 

 

 

9.

Contact your Dealer.

 

 

 

 

 

GB - 19