3.7.4.PUMP OVERRUN

The pump overrun may be varied (after the burner has been turned off). To access this function, it is necessary to press the reset button for over 5 seconds and then press it repeatedly until the character Aappears on the left-hand display.

The following modes are available:

011 minute of pump overrun

033 minutes of pump overrun

066 minutes of pump overrun

099 minutes of pump overrun

1212 minutes of pump overrun

1515 minutes of pump overrun

CO 24 hours of pump overrun

It is also possible to set a continuous pump operation by closing the contact of jumper 4 (see section 2.12.).

3.7.6.REGULATION MENU TABLE

3.7.5.TEST MODE

The P.C.B. allows the boiler to be forced to the maximum or minimum power.

To make the boiler operate at maximum power (100%: 24kW), it is necessary to turn the selector knob “A” (section 3.3.) and, using a

light pressure, bring it to the < > position. To return the boiler to its normal function, turn the selector “A” to the summer or winter position.

NOTE: To force the boiler to its maximum output it is necessary to completely rotate the potentiometer for maximum heating output regulation (PR).

Summary of the functions accessed when the RESET button is pushed for 5 seconds.

3.8.

BOILER SAFETY SYSTEMS

The boiler is protected from malfunctioning by means of internal checks by the P.C.B., which brings the boiler to a stop if necessary. In the event of the boiler being shut off in this manner, a code appears on the display which refers to the type of shut-off and the reason behind it.

There are two types of shut-off:

-SAFETY SHUTDOWN :these group of errors (characterised on the display by the letter “E”) this situation is automatically removed as soon as the cause behind it is resolved.

As soon as the origin of the shutdown disappears, the boiler starts up again and returns to its normal operation.

-SHUTDOWN: (characterised on the display by the letter “A”), it is not removed unless a manual intervention is made.

The boiler may return to operation only if reset by means of pressing the button “H” (see illustration on page 18) located at the centre of the display.

There follows a list of the shutdown modes and the respective codes shown on the display.

Shutdown (“A” type): if such a situation occurs, it is necessary to reset the boiler using the appropriate key. If this shutdown occurs again, an Authorised Service Centre should be contacted.

DISPLAY CAUSE

A01 Too many attempts to ignite on starting up

A02 After three attempts at ignition, no increase in DT was

detected

A03 The heating flow temperature exceeds 100°C during

operation

A07 Too many failures to flame in one period during operation

A19 The flame was detected after the gas valve had closed

A20 The flame was detected before the gas valve opened

A21 The flow switch does not close

A22 The flow switch does not open

A33 Problem with the fan

A99 Problem with the electronic monitoring

NOTE: When there is no ignition, check that the gas cock is open.

Safety shutdown: In the event that a safety shutdown occurs, it is necessary to contact an Authorised Service Centre.

18

275

Page 18
Image 18
Ariston 47-116-17 installation instructions Pump Overrun, Regulation Menu Table, Boiler Safety Systems

47-116-17 specifications

The Ariston 47-116-17 is a blend of advanced technology and user-centric design, setting a new standard in home appliances. This washing machine stands out not only for its robust performance but also for its energy-efficient features, making it a top choice for environmentally conscious consumers.

One of the key features of the Ariston 47-116-17 is its impressive capacity. With a drum that can hold up to 7 kg of laundry, it accommodates a variety of household needs, from small loads to larger family washes. This ensures that users can complete their laundry tasks efficiently without multiple wash cycles.

The machine is equipped with a powerful motor that delivers effective cleaning while minimizing noise levels. This is especially beneficial for households where laundry is often done at night or during quiet hours. The appliance operates discreetly, allowing users to run cycles without disturbing the peace of the home environment.

Technology is at the forefront of the Ariston 47-116-17, featuring a comprehensive range of washing programs tailored to suit different fabric types and soil levels. The machine includes specialized settings for delicate fabrics, wool, and heavily soiled garments, ensuring that every item is treated with care. This versatility allows users to maintain the quality of their clothes while achieving optimal cleaning results.

Energy efficiency is another significant characteristic of the Ariston 47-116-17. It boasts a high energy rating, which translates to lower electricity bills and a reduced carbon footprint. The appliance also incorporates water-saving technology, which not only conserves water but also enhances overall efficiency during the wash cycle.

Additionally, the machine is designed with user convenience in mind. Its intuitive control panel makes it easy for users to select the desired programs and settings, even for those who may not be tech-savvy. The digital display provides clear information on remaining wash time, cycle status, and any error messages that may arise.

In conclusion, the Ariston 47-116-17 is a reliable, efficient, and user-friendly washing machine that meets the diverse needs of modern homes. Its combination of capacity, advanced cleaning technologies, energy efficiency, and convenience features makes it a noteworthy addition to any laundry room. Users can enjoy the benefits of powerful performance with the peace of mind that comes from choosing an environmentally responsible appliance.