2.10.2. REMOTE CONTROL CONNECTION

2.10.3. ACCESSORY CONNECTION TERMINAL BLOCK

Refer to the illustrations in section 2.10.1.

1.Unscrew the screws “A” and rotate the control panel forwards.

2.Insert the connecting cables of the remote control into the cable gland “B” and open the lid of the control panel after having unscrewed the fastening screws “C”.

3.Remove a blind grommet, make a hole in it and pass the connecting cable of the remote control through it.

4.Connect the cables of the remote control to the flying lead (see section 2.11.) connected to position C5 on the P.C.B. (positions with no closed jumper).

5.Bring the grommet back to its initial position, then close the lid and lastly the control panel.

NOTE: The wiring of the RC must be done by using 2 x 0.5 mm2 cable this guarantees a maximum length of 500 m.

The “BUS” cable of the RC must be wired separately from the 230 VAC cable.

NOTE: The wiring of the Outdoor Sensor (SE) must be done by using 2 x 0.5 mm2 cable this guarantees a maximum length of 50 m. The sensor must be positioned at least 2 - 2.5 m above the ground and where possible facing north. The sensor must not be exposed to direct sunlight.

2.10.4.UNDER FLOOR HEATING CONNECTION

Refer to the illustrations in section 2.10.1.

1.Unscrew the screws “A” and rotate the control panel forwards.

2.Insert the connecting cable of the under floor heating sensor into the cable gland “B” and open the lid of the instrument panel after having unscrewed the fastening screws “C”.

3.Remove a blind grommet, make a hole in it and insert the connecting cable of the under floor heating sensor through it.

4.Remove the jumper located in the flying clamp

5.Connect the cables of the under floor heating sensor to the flying clamp connected to position C6 on the P.C.B. (in place of the position previously occupied by the jumper).

6.Bring the grommet back to its initial position, close the lid and lastly the control panel.

2.10.5.REMOTE CONTROL TERMINAL BLOCK,

CYLINDER PROBE AND SECONDARY OUTLET

CONNECTIONS TO THE P.CB.

C6 (3-11) (grey)

C5 (1-2) (red)

C7 (1-9) (violet)

JUMPER:

UNDER FLOOR

HEATING

SENSOR

REMOTE CONTROL

SECONDARY OUTLET (LPG valve, secondary pump)

275

9

Page 9
Image 9
Ariston 47-116-17 installation instructions Connections to the P.CB, Under Floor Heating Connection

47-116-17 specifications

The Ariston 47-116-17 is a blend of advanced technology and user-centric design, setting a new standard in home appliances. This washing machine stands out not only for its robust performance but also for its energy-efficient features, making it a top choice for environmentally conscious consumers.

One of the key features of the Ariston 47-116-17 is its impressive capacity. With a drum that can hold up to 7 kg of laundry, it accommodates a variety of household needs, from small loads to larger family washes. This ensures that users can complete their laundry tasks efficiently without multiple wash cycles.

The machine is equipped with a powerful motor that delivers effective cleaning while minimizing noise levels. This is especially beneficial for households where laundry is often done at night or during quiet hours. The appliance operates discreetly, allowing users to run cycles without disturbing the peace of the home environment.

Technology is at the forefront of the Ariston 47-116-17, featuring a comprehensive range of washing programs tailored to suit different fabric types and soil levels. The machine includes specialized settings for delicate fabrics, wool, and heavily soiled garments, ensuring that every item is treated with care. This versatility allows users to maintain the quality of their clothes while achieving optimal cleaning results.

Energy efficiency is another significant characteristic of the Ariston 47-116-17. It boasts a high energy rating, which translates to lower electricity bills and a reduced carbon footprint. The appliance also incorporates water-saving technology, which not only conserves water but also enhances overall efficiency during the wash cycle.

Additionally, the machine is designed with user convenience in mind. Its intuitive control panel makes it easy for users to select the desired programs and settings, even for those who may not be tech-savvy. The digital display provides clear information on remaining wash time, cycle status, and any error messages that may arise.

In conclusion, the Ariston 47-116-17 is a reliable, efficient, and user-friendly washing machine that meets the diverse needs of modern homes. Its combination of capacity, advanced cleaning technologies, energy efficiency, and convenience features makes it a noteworthy addition to any laundry room. Users can enjoy the benefits of powerful performance with the peace of mind that comes from choosing an environmentally responsible appliance.