Automatic cleaning with the FAST CLEAN function
With the FAST CLEAN mode, the internal temperature of the oven reaches 500°C. The pyrolytic cycle is activated, burning away food and grime residues. Dirt is literally incinerated.
Keep children away from the appliance during the automatic cleaning cycle as surfaces may become very hot. Particles may ignite inside the oven as a result of the combustion process. There is no cause for concern: this process is both normal and
Before initiating the FAST CLEAN mode:
•clean the oven door;
•remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use detergents;
•remove all accessories and the sliding rack kit (where present);
•do not place tea towels or pot holders over the oven handle.
!If the oven is too hot, the pyrolytic cycle may not start. Wait for the oven to cool down.
!The programme may only be started once the oven door has been closed.
!The desired Fast Clean mode will be confirmed and started automatically if the CLOCK icon button is not pressed within 10 seconds from selecting the cooking time
To activate the Fast Clean programme:
1.Switch the control panel on by pressing the 
icon.
2.Press the 
icon; the display will show the text “Piro”, “nor” and the default duration of 1:30 h (normal cycle) alternately.
3.Press the 
icon, then turn the TIMER knob to adjust the default cleaning level. There are 3 different levels to
choose from, each with a
1.Economy (ECO): turn the knob towards “”. Duration
1hour.
2.Normal (NOR): initial level. Duration 1 hour and 30 minutes.
3.Intensive (INT): turn the knob towards “”. Duration 2 hours.
4.Press the 
icon to confirm.
5.Press the 
icon to begin the cleaning cycle.
An end time for the FAST CLEAN cycle (as for a normal cooking cycle) may be programmed (see Programming the automatic cleaning end time).
Safety devices
•the door locks automatically as soon as the temperature
reaches a high value; the 
icon lights up on the display;
• pressing the | icon cancels the cleaning cycle at any AUS |
time; |
|
•if a malfunction occurs, the heating elements will be switched off;
•once the oven door has been locked, you cannot change the duration and end time settings.
Programming the automatic cleaning end time
1.Press the 
icon twice: the 
icon and the numerical digits on the display will begin to flash.
2.Turn the TIMER knob towards “” and “ ” to adjust the cleaning end time value.
3.Once you have reached the desired end time, press
the 
icon again. The display will show the duration, the cleaning end time and the set cleaning level alternately.
4. Press the 
icon to activate the programmed mode.
Programming has been set when the 
and 
icons are illuminated.
5.Once cleaning has finished, “END” appears on the display and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy (ECO) FAST CLEAN level has been selected, with the default duration of 1 hour. 12:30 is scheduled as the end time. The programme will start automatically at 11:30 a.m.
To cancel programming press the 
icon.
Once the automatic cleaning cycle is over
Before you can open the oven door, you will have to wait
for the 
icon to switch off: this indicates the oven temperature has dropped to an acceptable level. You will notice some white dust deposits on the bottom and the sides of your oven; remove these deposits with a damp sponge once the oven has cooled down completely. Alternatively, you can make use of the already heated oven, in which case it is not necessary to remove the deposits, they are completely harmless and will not affect your food in any way.
15
