84
default value.
07 Country Code [1,3]f(0,9)
08 Area Code [1,3]f(0,9)
09 Prefix Code [1,4]f(0,9)
10
A
dd an Inbound International Access
Code [1,3]f(0,9)
11 Deletes an Inbound International
Access Code [1,3]f(0,9)
12 Outbound International Access Code [1,3]f(0,9)
13 Long Distance Access Code (adds
both In-bound and Out-bound)20 [1,3]f(0,9)
14 Internal Call Access Code 1f(0~9,*,#)+[1,5]f(0~9)
15 Transit Call Access Code 1f(0~9,*,#)+[1,5]f(0~9)
16 Program Mode Access Code 1f(0~9,*,#)+[1,5]f(0~9)
17 Sets the Local PSTN Access Code 1f(0~9,*,#)+[1,5]f(0~9)
18 Deletes the Local PSTN Access
Code 1f(0~9,*,#)+[1,5]f(0~9)
19 The MGCP Trunk Access Code 1f(0~9,*,#)+ [1,5]f(0~9)
20 Adds a Routing Entry [1,6]f(0~9,*,#)+*+[1,2]f(0~9);
(as Entry * Cost)
21 Deletes a Routing Entry [1,6]f(0~9,*,#)
22 Adds a Member 6f(0~9,*1,*2,*3,*4), which are the last 6
characters of the MAC address and
*1,*2,*3,*4,*5, *6 means A, B, C, D,
E, F in hexadecimal
23 Deletes a Member 6f(0~9,*1,*2,*3,*4), which are the last 6
characters of the MAC address and
*1,*2,*3,*4, *5,*6 means A, B, C, D,
E, F in hexadecimal
24 Transit Call Status 0 : Disable ; 1: Enable
25 Adds a PIN Code [1,8]f(0~9)
26 Deletes a PIN Code [1,8]f(0~9)
27 Auto. Attendant Status 0 : Not Provided ; 1: Provided
28 PBX Extension Digit Length 1f(1~9)
29 Greeting Status 0 : Default ; 1: Recording
30 Skips Auto Attendant Access Code 1f(0~9,*,#)+[1,5]f(0~9)
96 Plays the recorded Greeting
Message # Stop playing
97 Password Change 4f(0~9)
98 System Restart 1: Enable
99 Enters the Greeting Message
Recording Mode (see the Greeting Message Recording
procedures in section 5.2)
20 Most of the In-bound/Out-bound Long Distance codes are set to one, as well as the phone set interface. The number, "13", will add both
In-Bound and Out-Bound Long Distance Access codes.