VR185
8
Basic Operation (continued)
6. Equalizer Selector
The equalizer function applies preset sound effects to the unit’s audio output signal. Press EQ
(6) to step through the following equalizer options: Flat, Jazz, Rock, Pop, Classical and Vocal.
The equalizer options will appear in the display as they are accessed.
7. Display Priority/Setting the Clock
Press T/F (7) momentarily to change the information displayed by the unit from mode-specific
information (radio frequency, CD track number, etc.) to the clock display. Press T/F again to
return to the default display.
The T/F button is also used to set the clock to the correct time. Press and hold T/F to enter into
clock set mode. When the time flashes on the display, rotate the volume control to adjust the
hours. When finished, press T/F again and rotate the volume control to adjust the minutes.
When no adjustments have been made for five seconds, the unit will resume normal operation.
8. Auxiliary Input
Press AUX (8) to enter auxiliary mode when a portable audio device is connected to the unit
through the AUX IN cable on the back panel.
9. Reset
Use a ballpoint pen or other thin metal object to press the reset button (9) to reset the unit
under the following circumstances: after the completion of initial installation/wiring, if none of
the function buttons work or if an error symbol appears in the display.
10. Recover Initial Value
To restore all factory settings, press and hold MOD until “EEP INIT” appears in the display.
Operación Básica (continuado)
6. Selector de Ecualizador
La función de ecualizador aplica efectos de sonido preseleccionados a la señal de salida de audio
de la unidad. Presione EQ (6) para activar uno de los siguientes modos de operación: Flat, Jazz,
Rock, Pop, Classical y Vocal. Cuando la función de ecualizador se activa, los niveles de graves y
agudos seleccionados más recientemente son ignorados.
7. Prioridad de Pantalla/Ajuste del Reloj
Presione momentáneamente T/F (7) para cambiar la información específica de modo
(frecuencia de radio, número de pista de CD, etc.) en la pantalla de la unidad, a la información
del reloj. Presione T/F nuevamente para regresar a la pantalla predeterminada.
El botón T/F también se utiliza para poner el reloj en hora. Presione y mantenga T/F para
ingresar en el modo de ajuste de reloj. Cuando la hora destelle en pantalla, rote el control de
volumen para ajustar la hora. Cuando termine, presione nuevamente T/F y rote el control de
volumen para ajustar los minutos. Si no se realiza ningún ajuste por cinco segundos, la
unidad volverá a operar normalmente.
8. Entrada Auxiliar
Presione AUX (8) para ingresar en modo auxiliar cuando se conecte un dispositivo de audio
portátil a la unidad con el cable AUX IN en la parte trasera del panel.
9. Reinicio
Utilice un bolígrafo u otro objeto de metal delgado para presionar "reset" (9) para reiniciar la
unidad bajo las siguientes circunstancias: luego de completar la instalación y el cableado inicial,
si ninguno de los botones funcionan o si un símbolo de error aparece en pantalla.
10. Recuperación de Valores Iniciales
Para restablecer toda la configuración de fábrica, presione y mantenga MODE hasta que "EEP
INIT" aparece en pantalla.
Opération de base (continué)
6. Equalizer Selector
The equalizer function applies preset sound effects to the unit’s audio output signal. Press EQ (6)
to step through the following equalizer options: Flat, Jazz, Rock, Pop, Classical and Vocal. The
equalizer options will appear in the display as they are accessed.
7. Priorité d'affichage/Réglage de l'horloge
Appuyez momentanément sur T/F (7) pour changer l'information affichée par l'appareil de
l'information spécifique à la mode (fréquence radio, numéro de piste CD) à l'affichage horloge.
Appuyez de nouveau sur T/F pour revenir à l'affichage par défaut.
Le bouton T/F est aussi utilisé pour régler l'heure correcte sur l'horloge. Appuyez et maintenez
l'appui sur le bouton T/F pour entrer dans le mode réglage de l'horloge. Lorsque l'heure s'affiche
sur l'affichage, faites tourner le contrôle du volume pour ajuster les heures. Lorsque vous avez
fini, appuyez de nouveau sur le bouton T/F et faites tourner le contrôle du volume pour ajuster
les minutes. Lorsque aucun ajustement n'a été fait pendant cinq secondes, l'appareil reprendra
l'opération normale.
8. Entrée auxiliaire
Appuyez sur AUX (8) pour entrer dans le mode auxiliaire lorsque l'engin audio portatif est
branché à l'appareil à travers le câble AUX IN dans le panneau d'arrière.
9. Réglage
Utilisez une bille ou autre objet métallique mince pour appuyer sur le bouton de réglage (9) pour
régler l'appareil dans les circonstances suivantes : après la terminaison de l'installation/câblage
initial si aucun bouton fonction ne marche ou si un symbole d'erreur apparaît sur l'affichage.
10. Récupération de valeur initiale
Pour restaurer tous les réglages d'usine, appuyez et maintenez l'appui sur MOD jusqu'à ce que "
EEP INIT " apparaît sur l'affichage.