Cleaning the lamp filter screens
In dirty or dusty environments, the dust filter screens on the lamp module | screen |
and lamp door and in the lamp compartment can become clogged, causing |
|
high temperatures inside the lamp module. These high temperatures can | screen |
impact lamp performance and operating life. Routine maintenance to |
|
remove dust and dirt from the screens lowers the lamp operating tempera- |
|
ture and prolongs lamp life. To maximize lamp life you will need to clean |
|
the screens every 250 hours. Lamp screen maintenance may need to occur |
|
more often than 250 hours depending on your installation/use environ- |
|
ment. |
|
1 Remove the lamp module. Refer to page 40 for instructions.
2Examine the dust filter screens on each side of the lamp module. If nec- essary, use compressed or canned air to clean the screens. Then use a cotton swab dipped in isopropyl alcohol to lightly wipe each screen. After you've wiped each screen, blow away any remaining contami- nants.
3 Examine the dust filter screen on the lamp door. If necessary, use com-
pressed or canned air to clean the screen. Then use a cotton swab dipped |
| |
in isopropyl alcohol to lightly wipe the screen. After you've wiped the | screen | |
screen, blow away any remaining contaminants. | ||
|
4Before you replace the lamp, repeat the cleaning process on the screen in the lamp compartment in the projector.
5 Replace the lamp module and lamp door. | screen |
42
