W6641 AND W6661 OPERATING INSTRUCTIONS
THE CONTROL PANEL
Models W6661 and W6641 have ASKO’s
program buttons then press Start. Refer to “Preset Programs” below for a definition of these programs.
Preset Programs
LCD Window
Press one of these buttons
Power Button
Press to turn on power to the machine.
Power Indicator Light
Glows when the power is turned on.
to select a program.
Displays the wash program, spin speed, temperature settings, and program run time.
Start/Stop Button
Press to start or stop/interrupt a program.
Door Open Button | Program Selection Controls |
These buttons allow you to customize the preset program | |
Press to open the | settings, such as wash temperatures, spin speed, rinses, |
glass door. | display language, etc. Refer to pages |
POWER BUTTON
The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power must be on before you can open the glass door, set the programs or start the machine.
START/STOP BUTTON
This button starts or stops a program. To stop a program, press and hold this button for a few seconds. If you stop a program using the Start/Stop button, you will have to reselect a program and press Start/Stop to restart the machine.
DOOR OPEN BUTTON
The power must be on and you must press this button to open the glass door. There will be a few seconds delay before the door opens.
If you need to open the door during a program, press and hold Door Open for a few seconds. The machine will stop and automatically drain enough water so the door can be opened safely. The program will resume when you close the door. For instructions on how to open the door manually in case of power failure, see page 21.
UNDERSTANDING THE LCD WINDOW
The LCD window is easy to read and understand. It | The illustration below explains each item on the LCD |
displays the wash program selection along with the | window. |
wash temperature, spin speed, and program run time. |
|
Door Open | Temperature |
Wash temperature for the | |
Displays when you press | selected program. |
the Door Open button. |
|
Program
When you press the Power button, the display toggles between the program numbers and the wash program names, (e.g., Normal, Super quick, etc.)
Preset Programs | Start |
Displays the program that | Indicates that you pressed Start |
is selected/running. | and the program is running. |
rpm
Spin speed for the selected program.
Program Time
When you start a program, the total time the program runs is displayed. As the program progresses, the time remaining displays. The program time toggles between the hours (e.g., 1h) and the minutes (e.g., 22).
Stop
Indicates that the program has ended or that you pressed Stop.
Page 12
