Aspire Digital 4625G manual DOS Flash Utility, USB Cdrom

DOS Flash Utility

Perform the following steps to use the DOS Flash Utility:

1.Press F2 during boot to enter the Setup Menu.

2.Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.

			Phoenix SecureCore(tm) Setup Utility
Information Main			Security	Boot	Exit
	Boot priority order:					Item Specific Help
					Use < > or < > to select
1		. IDE HDD: WDC WD6400BEVT-22A0RT0-(S1
2		. IDE CD: TSSTcorp CDDVDW TS-U633F-(				a device, then press
3		. USB FDC:				<F6> to move it up the
4		. PCI BEV: Atheros Boot Agent				list, or <F6> to move
	5	. USB HDD:				it down the list. Press
6		. USB CDROM:				<Esc> to escape the
7		. USB KEY:				menu.
8.
	Excluded from boot order:

F1 Help	Select	Item	F5/F6	Change	Values	F9	Setup	Defaults
ESC Exit	Select	Menu	Enter	Select	SubMenu	F10	Save	and Exit

3.Execute the BIOS.BAT batch file to update BIOS. The flash process begins as shown.

4.In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays.

Plug in the AC power to continue.

5.Flash is complete when the message Flash programming complete displays.

Chapter 2 37