IEEE 1394 Header
(see p.12 No. 15)
GND 
+12V 
+12V
RXTPBM_0 
RXTPBP_0
GND 
GND
RXTPAM_0 
RXTPAP_0 1
Besides one default IEEE 1394 port on the I/O panel, there is one IEEE 1394 header (FRONT_1394) on this motherboard. This IEEE 1394 header can support one IEEE 1394 port.
Serial port Header | RRXD1 |
DDTR#1 | |
DDSR#1 | |
| CCTS#1 |
(see p.12 No.31) |
|
| 1 |
| RRI#1 |
| RRTS#1 |
| GND |
| TTXD1 |
| DDCD#1 |
This COM1 header supports a serial port module.
HDMI_SPDIF Header | HDMI_SPDIF header, providing |
SPDIF audio output to HDMI | |
(see p.12 No. 1) | VGA card, allows the system to |
| connect HDMI Digital TV/ |
| projector/LCD devices. Please |
| connect the HDMI_SPDIF |
| connector of HDMI VGA card to |
| this header. |
Front USB 3.0 Panel Installation Guide
Step 1
Prepare the bundled Front USB 3.0 Panel, four HDD screws, and six chassis screws.
Step 2
Screw the 2.5” HDD/SSD to the Front USB 3.0 Panel with four HDD screws.
Step 3
Intall the Front USB 3.0 Panel into the 2.5” drive bay of the chassis.
Step 4
Screw the Front USB 3.0 Panel to the drive bay with six chassis screws.
35
