2.7 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

Serial ATAII Connectors

(SATA2_0: see

p.2, No. 9)

SATA2_0

 

(SATA2_1: see p.2, No. 10)

SATA2_1

(SATA2_2: see

p.2, No. 11)

SATA2_2

(SATA2_3: see

p.2, No. 12)

SATA2_3

 

 

These four Serial ATAII (SATAII) connectors support SATA data cables for internal storage devices. The current SATAII interface allows up to 3.0 Gb/s data transfer rate.

Serial ATA (SATA)

Either end of the SATA data

Data Cable

cable can be connected to the

(Optional)

SATA / SATAII hard disk or the

 

SATAII connector on this

 

motherboard.

 

 

USB 2.0 Headers

Besides four default USB 2.0

(9-pin USB4_5)

ports on the I/O panel, there

(see p.2 No. 15)

are two USB 2.0 headers on

 

this motherboard. Each

 

USB 2.0 header can support

 

two USB 2.0 ports.

(9-pin USB6_7)

 

(see p.2 No. 16)

 

Infrared Module Header

IRTX

(5-pin IR1)

+5VSB

DUMMY

(see p.2 No. 19)

1

 

 

GND

 

IRRX

This header supports an optional wireless transmitting and receiving infrared module.

19

English

ASRock H61M-PS2 Motherboard