ASRock PV530A-ITX manual CPU Fan Connector, Supply to this connector

A.Connect Mic_IN (MIC) to MIC2_L.

B.Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C.Connect Ground (GND) to Ground (GND).

D.MIC_RET and OUT_RET are for HD audio panel only. You don’t need to connect them for AC’97 audio panel.

System Panel Header

(9-pin PANEL1)

(see p.10 No. 8)

1

PLED+

PLED-

PWRBTN#

GND

DUMMY RESET#

GND HDLED-

HDLED+

This header accommodates several system front panel functions.

Chassis Speaker Header

Please connect the chassis

(4-pin SPEAKER 1) (see p.10 No. 9)

1

SPEAKER DUMMY

DUMMY +5V

speaker to this header.

Chassis Fan Connector

CHA_FAN_SPEED

(4-pin CHA_FAN1)+12V FAN_SPEED_CONTROL GND

(see p.10 No. 2)

Please connect a CPU fan cable to this connector and match the black wire to the ground pin.

CPU Fan Connector	1	GND
(4-pin CPU_FAN1)
	2	+12V
(see p.10 No. 20)	3	CPU_FAN_SPEED
	4	FAN_SPEED_CONTROL

Please connect a CPU fan cable to this connector and match the black wire to the ground pin.

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.

Pin 1-3 Connected

3-Pin Fan Installation

ATX Power Connector	12	24	Please connect an ATX power
(24-pin ATXPWR1)			supply to this connector.
(see p.10, No. 7)
	1	13
Though this motherboard provides 24-pin ATX power connector,				12	24
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your power
supply along with Pin 1 and Pin 13.
		20-PinATX Power Supply Installation		1	13

1 7