4.8Security
This menu allows a new password to be created or a current password to be cchanged. The menu also enables or disables the Secure Boot state and lets the user configure the System Mode state.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
| Main Advanced Event Logs Boot | Monitor | Security | Tool Exit |
| |
|
|
|
|
|
|
|
| Password Description |
|
| Set Setup Administrator |
| |
|
|
|
|
| Password |
|
| If ONLY | the Administrator’s password is set, then |
| |||
| this only limits access to Setup and is only asked |
| ||||
| for when entering Setup. |
|
|
|
| |
| If ONLY | the User’s password is set, then this |
| |||
| is a power on password and must be entered to |
| ||||
| boot or | enter Setup. In Setup the User will have |
| |||
| Administrator rights. |
|
|
|
| |
| The password length must be |
|
|
|
| |
| in the following range: |
|
|
|
| |
| Minimum | length | 3 |
|
|
|
| Maximum | length | 20 |
|
|
|
Administrator Password
User Password
Clear Password
System Boot Menu
HDD Security Configuration:
P1: HardDisk
P2: HardDisk
Administrator Password
To set an administrator password:
1.Select the Administrator Password item and press <Enter>.
2.From the Create New Password box, key in a password, then press <Enter>.
3.Confirm the password when prompted.
To change an administrator password:
1.Select the Administrator Password item and press <Enter>.
2.From the Enter Current Password box, key in the current password, then press <Enter>.
3.From the Create New Password box, key in a new password, then press <Enter>.
4.Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an administrator password, but press <Enter> when prompted to create/confirm the password.
Chapter 4: BIOS setup |