PCH Azalia Configuration
Allows you to control the detection of the Azalia device. Configuration options: [Auto] [Disabled]
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
PCH Azalia Configuration |
| Control Detection of |
Azalia | [Auto] | the Azalia device. |
Disabled = Azalia will be | ||
|
| unconditionally disabled |
|
| Enabled = Azalia will be |
|
| unconditionally Enabled |
|
| Auto = Azalia will be |
|
| enabled if present, |
|
| disabled otherwise. |
|
|
|
4.4.3SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
SATA Controller(s) | [Enabled] | Enable or disable SATA | ||
SATA Mode Selection | [AHCI] | Device. | ||
S.M.A.R.T. Status Check | [Enabled] |
| ||
Serial ATA Port 0 | HardDisk | (250.0GB) |
| |
Software Preserve | SUPPORTED |
|
| |
Port | 0 | [Enabled] |
|
|
Hot Plug | [Enabled] |
|
| |
SATA Device Type | [Hard Disk Drive] |
| ||
Spin Up Device | [Disabled] |
|
| |
Serial ATA Port 1 | HardDisk | (250.0GB) |
| |
Software Preserve | SUPPORTED |
|
| |
Port 1 | [Enabled] |
|
| |
Hot Plug | [Enabled] |
|
| |
SATA Device Type | [Hard Disk Driver] |
| ||
Spin Up Device | [Disabled] |
|
| |
Serial ATA Port 2 | HardDisk | (250.0GB) |
| |
Software Preserve | SUPPORTED |
|
| |
Port 2 | [Enabled] |
|
| |
Hot Plug | [Enabled] |
|
| |
SATA Device Type | [Hard Disk Driver] |
| ||
Spin Up Device | [Disabled] |
|
| |
|
|
|
|
|
SATA Controller(s) [Enabled]
This allows you to enable or disable the SATA Device. Configuration options: [Enabled] [Disabled]
SATA Mode Selection [AHCI]
This allows you to choose how SATA controller(s) should operate. Configuration options: [AHCI] [IDE] [RAID]
S.M.A.R.T. Status Check [Enabled]
Chapter 4: BIOS setup |