USB transfer time-out [20 sec]

Allows you to select the USB transfer time-out value. Configuration options: [1 sec] [5 sec] [10 sec] [20 sec]

Device reset time-out [20 sec]

Allows you to select the USB device reset time-out value. Configuration options: [10 sec] [20 sec] [30 sec] [40 sec]

Device power-up delay [Auto]

This allows you to set the maximum time the device will take before it properly reports itself to the Host Controller. Configuration options: [Auto] [Manual]

4.4.7TPM

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced

Configuration

 

Enables or Disables BIOS

TPM Support

[Disable]

support for security

 

 

device.O.S. will not

 

 

show Security Device. TCG

Current Status Information

 

EFI protocol and INT1A

NO Security Device Found

 

interface will not be

 

 

available.

 

 

 

Security Device Support [Disabled]

Allows you to enable or disable BIOS support for security devices. Configuration options: [Disabled] [Enabled]

4.4.8ACPI Settings

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

Advanced

ACPI Settings

 

Enables or Disables

 

 

System ability to

Enable Hibernation

[Enabled]

Hibernate (OS/S4 Sleep

State). This option may

ACPI Sleep State

[Both S1 and S3 avai...]

not be effective with

 

 

some OS.

 

 

 

Enable Hibernation [Enabled]

Allows you to enable or disable the Hibernation feature (OS/S4 sleep state). Configuration options: [Disabled] [Enabled]

ACPI Sleep State [Both S1 and S3 available for OS to choose from]

Allows you to set the ACPI Sleep state. Configuration options: [Suspend Disabled] [S1 only (CPU Stop Clock)] [S3 only (Suspend to RAM)]

[Both S1 and S3 available for OS to choose from]

4-22

Chapter 4: BIOS setup