4.RAID configuration utility selection (3-pin RAID_SEL1)

This jumper allows you to select the RAID configuration utility to use when you create disk arrays. Place the jumper caps over pins 2–3 to use the Intel® Rapid Storage Technology.

P9D-C/4L

RAID_SEL1

1

2

2

3

3ͬͩ Party

Intel

 

P9D-C Series RAID setting (Default)

 

 

5.Platform Enviromental Control Interface Setting (3-pin PECI1)

When an ASMB7-iKVM is installed, set these to pins 2-3 for correct sensor information of the Platform Environmental Control Interface (PECI). Set to pins 1-2 if ASMB7-iKVM is not installed.

2-28

Chapter 2: Hardware information