Asus 632, A636 manual Setting up MyPal, Installing and removing the battery

Setting up MyPal

Installing and removing the battery

1.First, remove the battery cover. Press on the battery cover latch behind the device, then slide down the battery cover to remove it.

2.Position and insert the right side of the battery with its contacts matching the 4-pin connector on the right side of the compartment. Then press the left side of the battery to completely fit into the compartment.

HOLD

HOLD

1 2

3.To remove, flip up the left edge of the battery to remove it from the compartment.

4.Place the battery cover on top of the opening at the back of the device making sure that the 4 notches match the 4 notches on the device. Then slide the battery over upward until you hear a click. When you hear the click, this means that the battery cover is securely locked into place.

HOLD HOLD

3 4

NOTE As a precaution, the power button is automatically disabled when you remove the battery cover. The device cannot be turned on while the battery cover is still detached.

Get started! 1-7