Additional storage

MyPal A636 comes with the standard SD card slot while MyPal A632 has an additional mini SD card slot . The SD card slot can be inserted with SD (Secure Digital) or MMC memory cards. It also supports SDIO cards of various functionalities including 802.11b, camera, scanner, etc.

Installing and removing SD/MMC/SDIO card

1.With the label side (usually the side with the card manufacturer’s name) face up, and the barcode/ serial number side face down, insert the card into the SD card slot located on top of the device.

2.Push the card all the way into the slot until it fits completely. If properly installed, the SD or MMC card edge aligns with the top edge of the device. SDIO cards usually have an extended part that protrudes over the slot edge.

3.To remove, press the card slightly until it ejects out. You may then safely remove the card.

NOTE An SD/MMC/SDIO/mini SD card fits only in one orientation, and slides smoothly into the slot if inserted correctly. DO NOT force the card into the slot!

Label

SD

Installing and removing mini SD card (for A632 only)

1. Flip open the mini SD card slot cover.

2. With the label side (usually the side with the card manufacturer’s name)

face up, and the barcode/serial number side face down, insert the card into the mini SD card slot

located on the left side of the device.

Label side

3.Push the card all the way into the slot until it fits completely.

4.To remove, press the card slightly until it ejects out. You may then safely remove the card.

1-10

Chapter 1

Page 16
Image 16
Asus A636 Additional storage, Installing and removing SD/MMC/SDIO card, Installing and removing mini SD card for A632 only