Connecting to a power source

IMPORTANT You need to charge the battery before using the device for the first time.

To connect the power adapter and charge the battery

1.Connect the power cable to the jack on the sync cable adapter.

2.Connect the 26-pin device plug of the sync cable to the 26-pin connector at the bottom of the device.

3.Connect the power plug to a grounded wall socket.

2

USB sync cable

26-pin device plug

Sync cable adapter

1

3

 

AC adapter/ Power cable

NOTE As soon as the power cable is connected to a power source, the battery will start charging and the power LED will show a steady red light. See page 2-25 on how to display the battery power status.

1-8

Chapter 1

Page 14
Image 14
Asus A636, 632 manual Connecting to a power source, To connect the power adapter and charge the battery