Manuals / Brands / Laundry Appliance / Washer / Sharp / Laundry Appliance / Washer

Sharp HT-CN300W Connecting other equipment (continued)

1 40

Download 40 pages, 2.46 Mb

11

HT-CN300W_A_2.fm02/7/11

HT-CN300W

Connections

- Connecting other equipment -

Connecting other equipment (continued)

„Connecting the VCR (VIDEO 1)

Notes:

zConnect the unit and the TV with a video cable. The image of the equipment

connected to the VIDEO 1 IN sockets does not appear on the TV even if it is

connected with an S-video cable.

„Connecting the camcorder, satellite

receiver, etc. (VIDEO 2)

Note:

Connect the unit and the TV with a video cable. The image of the equipment

connected to the VIDEO 2 IN sockets does not appear on the TV even if it is

connected with an S-video cable.

„Connecting the tape deck, etc. (AUX)

„Selecting the colour TV system

There are two colour TV systems: PAL and NTSC.

Select either PAL or NTSC according to the TV connected.

To select the colour TV system:

Set the TV TYPE switch (on the rear panel) to PAL or NTSC.

Notes:

zThe image and sound are not emitted from the VIDEO 1 OUT sockets when the

equipment is connected to the DVD or VIDEO 1 IN sockets.

If connected to the VIDEO 2 IN sockets, they are emitted from the VIDEO 1 OUT

sockets. If connected to the AUX IN sockets or whilst in the tuner mode, only the

sound is emitted.

Video cable

Video cable

Audio cable

Audio cable To audio

output sockets

To video

output socket VCR

To audio

input sockets

To video

input socket

To audio

output sockets

To video

output socket Camcorder,

Satellite receiver, etc.

Video cable

Audio cable

zThis unit can display on the TV its current speaker and mode settings when

connected to the TV via a video cable in the DVD or VIDEO mode.

However, if TV TYPE is set to NTSC when PAL system TV is connected, or vice

versa, the settings will not show correctly. (The display may show in black and white

or may be distorted.) Set accordingly.

zSet the colour system (PAL/NTSC) of your DVD or VCR according to the

connecting TV.

If the settings of TV, DVD/VCR and TV TYPE of this product do not match, pictures

will not show correctly or will be scrambled.

To audio output sockets Tape deck, etc.

Audio cable

Contents

Main HOME CINEMA COMMAND MODEL HT-CN300W OPERATION MANUAL - Special notes / Contents - HT-CN300W_A_1.fm02/7/11 Special notes Warning: Contents General Information Connections Accessories - Precautions - HT-CN300W_A_1.fm02/7/11 Precautions Correct General Warning: Volume control Controls and indicators Remote control Reference page Controls and indicators (continued) Main unit (with subwoofer) Front/Centre/Surround speakers Reference page Remote control sensor Reference page - Speaker connections - Speaker connections - Speaker / Aerial / Remote control sensor connections - Speaker Remote control sensor connection Main unit Aerial connection Connecting other equipment Only one video cable is supplied with this unit. HT-CN300W_A_2.fm02/7/11 Connecting the TV Connecting the DVD player To connect to the video socket with the video cable: To connect to the S-video socket with the S-video cable: Switching the DVD audio input: Connecting other equipment (continued) Connecting the VCR (VIDEO 1) Connecting the camcorder, satellite receiver, etc. (VIDEO 2) Connecting the tape deck, etc. (AUX) Selecting the colour TV system Connecting to the AC socket Setting the AC voltage selector Plugging in the main unit Plugging in the remote control Before connecting: Connecting to the AC socket (continued) Setting the FM/AM span selector To change the tuning zone: Demonstration mode To cancel the demonstration mode: Placing the speaker system Example of speaker locations: If colour variation occurs... If the colour variation is still present... Speaker Installation Installing the speakers on the wall 5 Changing the speaker angle: 1 illustration. Preparing the remote control Battery installation Test of the remote control How to open the remote control cover 1 2 3 Operation buttons on the remote control Operation buttons for the main unit 132 456 789 10 11 12 13 14 15 2019181716 - Operation buttons on the remote control - Switching the operation buttons for the main unit (Optical) (Coaxial) Operation buttons for other equipment 78910 1234 Operation buttons on the remote control (continued) Memory 1/2 buttons for other equipment - Memorising the remote control buttons - Memorising the remote control buttons Memorising operations in the Memory 2 buttons for other equipment 1 2 3 4 Memorising the remote control buttons (continued) Initialising the remote control buttons 1 2 3 Setting the clock 1 2 3 4 5 Display control ..... 210 29 30 MAXIMUM To change the display brightness (2 levels) TV screen display Enjoy Surround Sound (sound mode) Enjoy Surround Sound (sound mode) (continued) Dolby Digital and DTS: Dolby Pro Logic II: TV screen display: Acoustic effect Standard Sound mode To enjoy with dynamic sound To restore the standard surround sound: To enjoy in the standard mode To enjoy in the virtual mode Listening to the radio 1 2 3 Listening to a memorised station HT-CN300W_A_4.fm02/7/11 Speaker settings Speaker size setting 2 press the ENTER button. 3 Speaker delay setting 2 SW SL SR and press the ENTER button. Speaker settings (continued) Speaker level setting 3 Test tone 2 Timer and sleep operation - Timer and sleep operation - Timer and sleep operation (continued) Setting the sleep timer 1 2 3 Troubleshooting chart Operation Sound Tun er Remote control - Troubleshooting chart / Error indicators and warnings / Maintenance - Error indicators and warnings Maintenance Cleaning the cabinet - Specifications - Specifications Tun er Amplifier General Subwoofer Front/Centre/Surround speakers