HT-CN300W

Basic Operation - Display control / Sound control -

Display control

To change the display brightness (2 levels)

You can switch the brightness of the main unit display by pressing the DIMMER button.

Dimmed (Dimmer mode)

Brightened

TV screen display

By pressing the DISPLAY button whilst in the DVD or VIDEO mode, you can check the status or setting on the TV screen.

Example: TV screen display

Caution:

This unit can display on the TV its current speaker and mode settings when in the DVD or VIDEO mode, but not if connected to the TV via an S-video cable. This function is only available via the Video cable connection.

Sound control

Volume control

Press the VOLUME button to increase the volume and the VOLUME button for decreasing.

Main unit

0 1 2

.....

29 30 MAXIMUM

 

 

TV screen

Bass control

When the X-BASS button is pressed, the unit will enter the extra bass mode which emphasises the bass frequencies. To cancel the extra bass mode, press the X-BASS button.

Main unit

TV screen

Bass frequencies are

Cancelled.

emphasised.

 

Equaliser

When the EQ button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQ button repeatedly until the desired sound mode appears.

FLAT

The sound is not modified.

 

 

ROCK

Bass and treble are emphasised.

 

 

POPS

Bass and treble are slightly emphasised.

 

 

JAZZ

Treble is cut a little.

 

 

CLASSIC

Treble is reduced a lot.

 

 

VOCAL

Vocals (midrange tones) are emphasised.

 

 

Note:

Bass control and equaliser are enabled only when the sound mode is set to "STEREO" or "VIRTUAL" (see page 26).

23

02/7/11 HT-CN300W_A_4.fm

Page 24
Image 24
Sharp HT-CN300W operation manual Display control, Sound control