Listening to a memorised station
„Memorising a station
You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning)
1 Perform steps 1 - 3 in "Listening to the radio" on page 27.
2 Press the MEMORY button to enter the preset tuning saving mode.
3 Within 30 seconds, press the 
or 
button to select the preset channel number.
zStore the stations in memory, in order, starting with preset channel 1.
zWhen " 
" is displayed, a station has already been stored in memory.
4 Within 30 seconds, press the MEMORY button to store that station in memory.
If the "MEMORY" and preset number indicators go out before the station is memorised, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a preset station.
When a new station is stored in memory, the station previously memorised will be erased.
Note:
The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead disconnection.
„To recall a memorised station
Press the 
or 
button to select the desired station.
Preset channel | Frequency and frequency band |
„To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1 Press the 
or 
button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each.
2 Press the 
or 
button again when the desired station is located.
„To erase all the contents of the preset
memory
1 Press the TUNER/BAND button.
2 Hold the CLEAR button down for 3 seconds or more. 3 Whilst "CLEAR" is flashing, press the ENTER button.
Operation | memorised station - |
Basic | Listening to a |
| - |
|
|
28
02/7/11
