Working with the Tablet PC

SIM card

A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or Tablet PC and, together with an integrated UMTS module, enables access to a mobile radio network.

When handling SIM cards, follow the instructions supplied by the provider.

Inserting the SIM card

► Remove the battery, see Chapter "Removing the battery", Page 41.

► Slide the SIM card into the slot (1) until it engages, as shown in the battery compartment. The notch shows to the left, the chip to the bottom.

1

Install the battery again, see Chapter "Installing battery", Page 42.

Removing a SIM card

► Remove the battery, see Chapter "Removing the battery", Page 41.

► Press on the edge of the SIM card so that it jumps up slightly out of the slot.

► Pull the SIM card out of the slot in the direction of the arrow (1).

1

Install the battery again, see Chapter "Installing battery", Page 42.

Wireless LAN / Bluetooth / UMTS

The installation of radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device.

46

Fujitsu Technology Solutions

Page 50
Image 50
Fujitsu Q550-30GB-01 manual Wireless LAN / Bluetooth / Umts, Inserting the SIM card, Removing a SIM card