Working with the Tablet PC
Switching the wireless components on and off
Before switching on your device for the first time, the on/off switch for radio components must be in the "ON" position.
►Slide the ON/OFF switch into the "ON" position to activate the radio components.
or
►Slide the ON/OFF switch to the "OFF" position to deactivate the radio components.
If you switch off the radio components, the wireless LAN transmission unit (antenna) and, if present, the Bluetooth and UMTS module will also be switched off.
You can enable and disable the installed radio components individually using the WirelessSelector programme
You can also deactivate the wireless components individually in the BIOS Setup. For this to occur, you must either not have assigned a supervisor password or if a supervisor password has been assigned, you must know this password.
Pay attention to the additional safety notes for devices with radio components provided in the "Safety/Regulations" manual.
Details on using Wireless LAN can be found in the online help system included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.
Fujitsu Technology Solutions | 47 |