2.7Installing system memory
The motherboard comes with two Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets. These sockets support up to 2 GB system memory using unbuffered ECC or
104 Pins | 80 Pins | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIMM2
®
DIMM1
2.7.1Memory configurations
You may install any DDR DIMMs with 64 MB, 128 MB, 256 MB, 512 MB, and 1 GB densities into the DIMM sockets.
Memory frequency/CPU FSB synchronization
CP U FSB | DDR DIMM Type | Memory Frequency |
100 MHz | PC2100/PC1600 | 266/200 MHz |
133MHz | PC2700/PC2100/PC1600 | 333/266/200 MHz |
166 MHz | PC2700/PC2100/PC1600 | 333/266/200 MHz |
|
|
|
200 MHz | PC2700/PC2100/PC1600 | 333/266/200 MHz |
|
|
|
• When using 100 MHz CPU FSB, any DDR DIMM you installed may run only at a maximum of 266 MHz due to chipset limitation.
•If you are using CPU FSB other than 100 MHz and installed 400 MHz DDR DIMMs, the memory frequency downgrades to 333 MHz.
2 - 10 | Chapter 2: Basic installation |