5.4.2Memory configuration

The items in this menu show the memory configuration settings. Select an item then press <Enter> to display a pop-up menu with the configuration options.

Memory Configuration

Current DRAM Frequency

133 MHz

DRAM Clock

[By SPD]

DRAM Timing

[Auto by SPD]

x DRAM CAS Latency

2.5

x Bank Interleave

Disabled

x Precharge to Active (Trp)

5T

x Active to Precharge (Tras)

7T

x Active to CMD (Trcd)

5T

DRAM Burst Length

[4]

DRAM Command Rate

[2T Command]

Write Recovery Time

[3T]

tWTR

[2T]

Select Menu

Item Specific Help

Set DRAM Frequency.

DRAM Clock [By SPD]

Sets the DRAM frequency. Configuration options: [By SPD] [133 MHz] [166 MHz]

DRAM Timing [Auto by SPD]

The DRAM clock is set according to DRAM SPD (Serial Presence Detect). Select [Auto by SPD] for automatic DRAM clock detection. Select [Manual] to set the DRAM Timing manually. Select [Safe] to set the DRAM timing to safe value. Configuration options: [Auto by SPD] [Manual] [Safe]

DRAM Burst Length [4]

Sets the DRAM burst length width. Configuration options: [4] [8]

DRAM Command Rate [2T Command]

Sets the DRAM command rate .

Configuration options: [1T Command] [2T Command]

Write Recovery Time [3T]

Sets the DRAM write recovery time. Configuration options: [2T] [3T]

tWTR [2T]

Sets the tWTR time. Configuration options: [1T] [2T]

ASUS Terminator 1 A7VT400

5 - 15