2.8.2Expansion card installation

To install a PCI or AGP card.

1.Place the chassis on its side.

2.Remove the metal bracket opposite the slot that you wish to use.

3.Align the card golden fingers to the slot and its metal bracket to the slot opening on the chassis.

4.Press the card firmly until it is

properly seated on the slot.

Metal bracket

PCI slot (PCI1)

 

5.Secure the card to the chassis

with a bracket screw.

AGP slot (AGP1)

2.8.3Configuring an expansion card

After installing the expansion card, configure it by adjusting the software settings.

1.Turn on the system and change the necessary BIOS settings, if any. See Chapter 5 for information on BIOS setup.

2.Install the software drivers for the expansion card.

ASUS Terminator 1 A7VT400

2 - 13