2.9Installing a CD-ROM drive

A CD-ROM drive is an optional item in this barebone system. Refer to the instructions in this section if you acquired a model without a CD-ROM.

To install a CD-ROM drive:

1.Place the chassis upright.

2.Insert the CD-ROM drive into the upper 5.25-inch drive bay.

5.25-inch drive bay

3.Carefully push the CD-ROM drive into the bay until its screw holes align with the holes on the bay as shown.

4.Secure the CD-ROM with two screws on each side of the bay.

CD-ROM screws

ASUS Terminator 1 A7VT400

2 - 15