5.Connect a power cable from the power supply to the power connector at the back of the CD-ROM. Use the cable with the white connector labeled P1.

6.Connect one end of the IDE ribbon cable to the IDE interface at the back of the CD-ROM, matching the red stripe on the cable with Pin 1 on the IDE interface.

7.Connect one end of the CD-ROM audio cable to the

4-pin connector at the back of the CD-ROM.

8.Connect the other end of the IDE ribbon cable to the secondary IDE connector (black connector labeled SEC_IDE) on the motherboard.

CD-ROM audio cable

IDE ribbon cable

Red stripe to Pin 1

Power cable (P1)

Secondary IDE connector (SEC _ IDE)

9.Connect the other end of the audio cable to the black 4-pin connector labeled CD on the motherboard.

CD-ROM connector ( C D )

2 - 16

Chapter 2: Basic installation