3.Select your desired method of configuration. Auto configuration

a.Select Auto Configuration then press <Enter>.

b.The utility prompts a message to input the RAID size, use the up or down arrow keys to set the RAID size then press <Enter>.

c.Press <Y> to confirm or <N> to return to the Main Menu.

Manual configuration

a. Select Manual

MAIN MENU

 

 

chunk size

configuration and

Auto configuration

 

 

press <Enter>.

Manual configuration

4K

 

 

 

The following

 

8K

 

16K

pop-upmenu

 

32K

 

 

appears.

 

64K

 

128K

b.Use the up or down arrow keys to select a chunk size appropriate to your drive usage then press <Enter>.

TIP: For server systems, we recommend using a lower array block size. For multimedia computer systems used mainly for audio and video editing, we recommend a higher array block size for optimum performance.

c.The selection bar moves to the Physical Drive menu. Using the up or down arrow keys, select a drive then press <Enter> to set the first drive of the RAID set.

PHYSICAL DRIVE

0XXXXXXXXXXX

1 XXXXXXXXXXX

2 XXXXXXXXXXX

3 XXXXXXXXXXX

XXXXXXMB XXXXXXMB XXXXXXMB XXXXXXMB

d.Repeat step c to set the second, third and fourth drive. The number of available drives depend on the installed and enabled physical drives in the system.

e.The utility prompts a message to input the RAID size, use the up or down arrow keys to set the RAID size then press <Enter>.

f.Press <Y> to confirm or <N> to return to the Main Menu.

5-36

Chapter 5: Software support