Audio 2, 4 or 6-channel configuration

 

Headphone/2-Speaker

4-Speaker

6-Speaker

Light Blue

Line In

Surround Out

Surround Out

Lime

Line Out

Front Speaker Out

Front Speaker Out

Pink

Mic In

Mic

Center/Bass

 

 

 

 

7.USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.

8.USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.

9.Serial connector. This 9-pin COM1 port is for serial devices.

10.Coaxial S/PDIF Out port. This port connects an external audio output device via a coaxial S/PDIF cable.

11.PS/2 keyboard port. This purple connector is for a PS/2 keyboard.

1.10.2 I nternal connectors

1. I DE connectors (40-1 pi n PRI _I DE, SEC_I DE)

This connector supports the provided UltraATA133 IDE hard disk ribbon cable. Connect the cableʼs blue connector to the primary (recommended) or secondary IDE connector, then connect the gray connector to the UltraATA133 slave device (hard disk drive) and the black connector to the UltraATA133 master device.

• Follow the hard disk drive documentation when setting the device in master or slave mode.

•Pin 20 on each IDE connector is removed to match the covered hole on the UltraATA cable connector. This prevents incorrect orientation when you connect the cables.

•The hole near the blue connector on the UltraATA cable is intentional.

A8S-X SE

A8S-X SE IDE Connectors

 

 

SEC IDE

 

 

 

 

IDE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRI_

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1-22

Chapter 1: Product introduction