2.5.5 APM Confi gurati on

Power Button Mode

[On/Off]

Restore on AC Power Loss

[Always OFF]

Power On By PS2 Keyboard

[Disabled]

Power On By PS2 MOUSE

[Disabled]

Power On By PCI Devices

[Disabled]

Power On By External Modem

[Disabled]

Power On By RTC Alarm

[Disabled]

Power Button Mode [ On/Off]

Allows the system to go into On/Off mode or suspend mode when the power button is pressed. Configuration options: [On/Off] [Suspend]

Restore on AC/Power Loss [ Al ways OFF]

When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state whatever the system state before the AC power loss. Configuration options: [Always OFF] [Always On] [Keep Previous State]

Power On By PS2 Keyboard [ Di sabl ed]

Allows you to disable or set the keyboard wake-up feature. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]

Power On By PS2 Mouse [ Di sabl ed]

When set to [Enabled], this parameter allows you to use the PS/2 mouse to resume the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]

Power On By PCI Devi ces [ Di sabl ed]

Allows you to enable or disable the PME to generate a wake event. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]

Power On By External Modems [ Di sabl ed]

Allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in Soft-off mode. Configuration options: [Disabled] [Enabled]

2-24

Chapter 2: BIOS Setup